TGuard AeroThumb and AeroFinger are wearable devices designed to help children discontinue persistent thumb- and finger-sucking habits.
The devices are worn on the hand and use a ventilated design to interrupt the suction that reinforces persistent digit sucking. TGuard does not immobilize the hand or place an appliance inside the child’s mouth.
Official regulatory record
FDA regulatory status
The original T-GUARD device received U.S. Food and Drug Administration 510(k) clearance after the FDA determined that it was substantially equivalent to a legally marketed predicate device.
| FDA device name | T-GUARD |
|---|---|
| 510(k) number | K945537 |
| FDA decision | Substantially Equivalent |
| Decision date | March 23, 1995 |
| FDA classification name | Device, Finger-Sucking |
| Product code | LQX |
| Device class | Class I |
| Regulation number | 21 CFR 890.3475 |
| FDA review panel | Dental |
| Medical specialty | Physical Medicine |
MED et al., Inc. maintains current FDA establishment registration and device-listing information for TGuard products.
What FDA clearance means
FDA 510(k) clearance means that the FDA reviewed the device and determined it to be substantially equivalent to an appropriate legally marketed predicate device.
FDA clearance is not the same as FDA approval. TGuard should not be described as “FDA approved,” “FDA certified” or endorsed by the FDA.
FDA establishment registration and device listing likewise do not represent FDA approval or endorsement. They are regulatory requirements applicable to medical-device establishments and listed devices.
Device classification
The FDA classifies finger-sucking devices under product code LQX as Class I medical devices subject to general regulatory controls.
The FDA’s classification database identifies the category as “Device, Finger-Sucking” under 21 CFR 890.3475.
Although this device category is currently exempt from new premarket-notification requirements, T-GUARD previously completed the 510(k) process and received clearance under K945537.
Intended purpose
TGuard is designed to help children discontinue persistent non-nutritive thumb or finger sucking.
Persistent digit sucking can place repeated forces on developing teeth and oral structures. Depending on the frequency, intensity, duration and sucking pattern, the habit may contribute to dental changes such as:
Potential habit-related dental changes
- Anterior open bite
- Increased overjet
- Crossbite
- Other changes in developing teeth and oral structures
TGuard is intended to help stop the persistent sucking behavior that produces those continuing forces.
What TGuard is not intended to do
- Move or straighten teeth
- Correct an established malocclusion
- Replace an evaluation by a qualified healthcare professional
- Diagnose or treat an underlying medical, developmental or behavioral condition
Parents concerned about their child’s teeth, bite, jaw development or oral health should consult an appropriate healthcare professional.
How TGuard works
Thumb and finger sucking typically create a seal between the mouth and the digit. That seal produces suction associated with the soothing or reinforcing sensation of the habit.
TGuard’s ventilated design allows air to enter around the thumb or fingers, interrupting the vacuum while still allowing the child to place the digit near or inside the mouth.
With consistent use, the familiar sucking behavior becomes less reinforcing, helping the child discontinue the habit.
Individual results can vary
Treatment time and individual results can vary. Parents and caregivers should follow the instructions supplied with the treatment kit.
Contact TGuard early if you encounter problems with fit, removal, switching hands or treatment consistency.
Worn on the hand—not inside the mouth
TGuard is an externally worn device. It is not attached to the child’s teeth and does not require dental impressions or installation inside the mouth.
Its non-restrictive design is intended to preserve normal hand and arm movement so children can continue ordinary activities such as playing, drawing, reading and sleeping while wearing the appropriate device.
Product materials and safety
TGuard products are manufactured and assembled in the United States.
For information about product materials, use, care and safety, review the applicable product instructions and our Materials Safety Statement.
Always select the appropriate device and size, install it according to the supplied instructions and inspect the device and its components regularly during treatment.
HSA, FSA and insurance
FDA classification, clearance, establishment registration and device listing do not by themselves guarantee HSA/FSA eligibility, insurance coverage or reimbursement.
TGuard is pursuing automatic HSA/FSA product eligibility. Until eligibility and card acceptance are confirmed, customers should not assume that an HSA or FSA payment card will be accepted automatically.
Coverage and reimbursement decisions vary by plan and administrator.
Regulatory FAQ
Is TGuard FDA approved?
No. “FDA approved” is not the correct terminology for TGuard.
The original T-GUARD device received FDA 510(k) clearance under K945537. TGuard products are associated with the FDA’s Class I “Device, Finger-Sucking” classification under product code LQX.
What is the difference between clearance, registration and listing?
510(k) clearance means the FDA determined that the submitted device was substantially equivalent to a legally marketed predicate device.
Establishment registration identifies a company or facility involved in regulated medical-device activities.
Device listing identifies devices associated with a registered establishment.
Registration and listing do not mean that the FDA has approved, certified or endorsed a company or product.
Is TGuard a dental device?
The FDA identifies the regulatory category as “Device, Finger-Sucking.” The device is reviewed within a dental context but is worn externally on the hand rather than inside the mouth.
TGuard is designed to help discontinue persistent digit sucking and is not an orthodontic appliance intended to reposition teeth.
Can TGuard correct an existing open bite, overjet or crossbite?
TGuard is not intended to move teeth or correct an established malocclusion. Its purpose is to help discontinue the persistent sucking behavior that may continue placing forces on developing teeth and oral structures.
A dentist or pediatric dentist should evaluate existing dental changes and advise whether additional observation or treatment is appropriate.
Does FDA status make TGuard automatically HSA/FSA eligible?
No. FDA status and HSA/FSA eligibility are separate determinations.
Product eligibility, payment-card acceptance and reimbursement depend on the applicable eligibility system, merchant capabilities and the customer’s benefit plan.
Questions or regulatory inquiries?
Contact us if you have questions about TGuard regulatory information, product materials or proper use.
